Lucent Technologies 6000 - Manual (Page 458)

11-24 MAX 6000/3000 Network Configuration Guide
Setting Up Virtual Private Networks
Configuring ATMP tunnels
Auth Pool=No
Auth Req=Yes
Password Server=No
Password Port=N/A
Local Profile First=No
Sess Timer=0
Auth Src Port=0
Auth Send Attr 6,7=Yes
For detailed information about each parameter, see the MAX Reference.
2 Exit the profile and, at the exit prompt, select the exit and accept option.
3 On the RADIUS server, open the RADIUS user profile and create an entry for a mobile
client. For example:
node1 Password="top-secret"
Ascend-Metric=2,
Framed-Protocol=PPP,
Ascend-IP-Route=Route-IP-Yes,
Framed-Address=200.1.1.2,
Framed-Netmask=255.255.255.0,
Ascend-Primary-Home-Agent=10.1.2.3,
Ascend-Home-Agent-Password="private"
Ascend-Home-Agent-UDP-Port=5150
Ascend-Home-Network-Name=home-agent
4 Close the user profile.
5 Open a Connection profile and configure an IP routing connection to the Network A
Home Agent. For example:
Ethernet
Connections
any Connection profile
Station=home-agent
Active=Yes
Encaps=MPP
Dial #=555-1212
Route IP=Yes
Encaps options...
Send Auth=CHAP
Recv PW=home-pw
Send PW=foreign-pw
IP options...
LAN Adrs=10.1.2.3/24
6 Exit the profile and, at the exit prompt, select the exit and accept option.
Finally, set the Home Agent aspect of the multimode configuration:
1 Open a Connection profile and configure an IP routing connection to the Network B
Foreign Agent. For example:
Ethernet
Connections
any Connection profile
Station=foreign-agent
Active=Yes
Encaps=MPP