Lowrance electronic X86 TX User Manual
Page 22
18
No damage will occur if the power wires are reversed. However, the
unit will not work until the wires are attached correctly.
Mounting The Sonar Unit: In-Dash or Bracket
You can install the sonar unit on the top of a dash with the supplied
bracket. It can also be installed in the dash with an optional dash-
mounting kit. The FM-5 mount kit will work for both the X86 DS and
X86 TX.
In-Dash Installation
The following figure shows dimensions for in-dash mounting. The in-
dash adapter kit includes a template for cutting the mounting hole and
complete installation directions on instruction sheet 988-0147-43.
NOTE:
Your unit needs only one cable, but some of the other products cov-
ered by the FM-5 instruction sheet use more. When installing your
unit, use the instructions for the transducer cable and ignore refer-
ences to any others.