Lowrance electronic X86 TX - Manual (Page 7)

3
Dual Search Transducer
Your unit is packed with a Dual Search Skimmer Transducer that can
transmit at 83 kHz and 200 kHz.
A new innovation, the 83 kHz frequency offers superior sonar perform-
ance at all depths from very shallow up to 1,000 ft and provides up to
120º of fish-finding coverage.
Preparations
You can install the sonar system in some other order if you prefer, but
we recommend this installation sequence:
Caution:
You should read over this entire installation section before drill-
ing any holes in your vessel!
1. Determine the approximate location for the sonar unit, so you can
plan how and where to route the cables for the transducer and power.
This will help you make sure you have enough cable length for the de-
sired configuration.
2. Determine the approximate location for the transducer and its cable
route.
3. Determine the location of your battery or other power connection,
along with the power cable route.
4. Install the transducer and route the transducer cable to the sonar
unit.
5. Install the power cable and route it to the sonar unit.
6. Mount the sonar unit.