English – LG D2342P User Manual
ASSEMBLING AND PREPARING
Accesses the main menus.(See p.13)
This function allows you to lock the current control settings, so
that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message "OSD
UNLOCKED" should appear.
Use this button to enter SUPER ENERGY SAVING menu.For
3D display settings.(See p.14)
When adjusting your display settings, always press the AUTO button on the MONITOR
SETUP OSD. (Only Analog Mode)
If you want the best screen, set to the resolution of the below.
The best display mode
1920 x 1080
VOLUME (Only HDMI mode) Adjust the volume of the Monitor set.(See p.14)
You can choose the input signal.
When two input signals are connected, you can select the input signal (D-SUB/DVI/
HDMI) you want.
When only one signal is connected, it is automatically detected. The default setting is
Exit the OSD(On Screen Display).
Turns the power on or off.
The power indicator stays blue if the display is running
properly (On Mode). If the display is in Sleep Mode , the
power indicator is blinking blue.