Lowrance electronic Lowrance iWAY 250C - Manual (Page 22)

16
est such as a restaurant, gas station, a contact that you have saved or a
map location that you would like to visit.
The Location Information Screen will include as much information as
possible about the location that you have selected. If it's a cursor loca-
tion, this may include only the lat/lon coordinates and the distance and
bearing to the location, although a cursor location close to a road will
also have the street address. If it's a Point of Interest the information
should include street address and even the shop's phone number.
The Location Information Screen for a saved contact (shown left)
and for a restaurant POI (shown right).
From the information screen you can choose to
G
O
T
O
a selected loca-
tion, making the iWAY generate a route. This is the easiest way to gen-
erate a route to a destination. See the heading "Navigating to a Con-
tact" below for details. The command
F
IND
O
N
M
AP
can be used to center
the map on the selected location.
Creating and Saving Contacts
You can use the Location Information button to access information con-
cerning anything from a Point of Interest to a simple cursor position. If
you have selected a cursor position a button labeled "Add to Address
Book" will appear on the Location Information Screen. Select
A
DD TO
A
DDRESS
B
OOK
from the Location Information Screen to save a contact at
the selected location.
NOTE:
You can also create a contact at your current position. If your map
cursor is active choose
C
LEAR
C
URSOR
from the Map Display Toolbar
and the toolbar and cursor will disappear. The Save
Location button replaces the Location Information button.
This new button looks like the one at right. Press it to save
a contact at your current position.