Lowrance electronic Lowrance iWAY 250C - Manual (Page 44)

38
To disable Safety Mode and switch to Passenger Mode make sure the
vehicle is not moving. From the Options Menu choose
S
AFETY
M
ODE
to
toggle whether the option is on or off. The button itself will show its
current state. A dialog like the one in the following image appears.
Choose
Y
ES
to disable Safety Mode and return to the Options Menu.
Safety Mode disable menu.
WARNING:
When a GPS unit is used in a vehicle the vehicle operator
is solely responsible for operating the vehicle in a safe
manner. Vehicle operators must maintain full surveillance
of all pertinent driving conditions at all times. An accident
or collision resulting in damage to property, personal in-
jury or death could occur if the operator of a GPS-
equipped vehicle fails to pay full attention to travel condi-
tions and vehicle operation while the vehicle is in motion.
Do not attempt to configure, adjust or enter information
into your GPS unit while driving.
Sound and Voice Setup
Much of the information you will receive from the iWAY will come in
the form of sounds. Use the Sound and Voice Setup command to adjust
the type and frequency of audio output iWAY provides. From the Op-
tions Menu choose
S
OUND AND
V
OICE
S
ETUP
.
To turn Key Press Sounds on and off: Tap the checkbox to the left
of the label
K
EY
S
OUNDS
to check it (turn on) and uncheck it (turn off).
To turn Voice Instructions on and off: Tap the checkbox to the left
of the label
V
OICE
I
NSTRUCTIONS
to check it (turn on) and uncheck it (turn
off). If you turn off Voice Instructions, voice instructions can still be
accessed by pressing
SPEAK
which will make iWAY state the current
instruction.
To adjust Periodic Voice instruction frequency: Press and drag
the blue button on the
P
ERIODIC
V
OICE
slider. Drag it to the right to in-
crease the frequency of spoken instructions or to the left to decrease it.