Dsp (digital sound processor) mode, Bypass mode, Enhancer mode – LG AR702TS User Manual
Page 34
34
DSP (Digital Sound Processor) mode
Press RECEIVER, and then press DSP repeatedly
to select the DSP (Digital Sound Processor) mode
you want.
The selected sound appears in the display window.
BYPASS mode
Press RECEIVER, and then press BYPASS
repeatedly to select 2 channel sound from front
speakers or subwoofer.
The selected sound appears in the display window.
ENHANCER mode
This mode enhances the sound quality of compressed
input signal (MP3, WMA, etc) from front speakers and
subwoofer.
Press RECEIVER, and then press ENHANCER
repeatedly to enhance the sound quality.
Display
CINEMA
BIG HALL
CLUB
JAZZ
ARENA
STADIUM
Description
Reproduces the powerful sound of
movie theater.
Reproduces the exciting sound of
movie concert halls.
Reproduces the normal music
sound.
Reproduces the acoustics of a jazz
club.
Reproduces the feeling of a sport
ground.
Reproduces the feeling of sports
open-air stadium.
Display
DSP BYPASS
STEREO
PURE BYPASS
Description
Reproduces the DSP bypass mode
with bass management from front
speakers and subwoofer.
Reproduces the 2 or 2.1 channel
bypass sound in multi channel from
front speakers and subwoofer.
Reproduces the pure bypass mode
with no bass management from front
speakers.
Display
VSM-3D
VSM-ES
MUSIC
ENHANCER
Description
Reproduces the 3D sound effect
when the input source is selected 2
or 2.1 channel.
Reproduces the 3D sound effect
when the input source is selected 5.1
channel or more.
Reproduces the compounded the
high-frequency. This mode has an
effect on the section of Bit rate and
Sampling frequency as shown below.
- Bit rate : 80-96Kbps
- Sampling frequency : 32 - 44.1 kHz