Lexicon MC-12 Digital Controller Lexicon MC-12 - Manual (Page 142)

MODE ADJUST
Lexicon
5-26
MUSIC
• Designed for playback of 5.1-channel dts music sources.
• The MUSIC listening mode is not available unless both
side and rear speakers are present.
• Applies ASA processing to signals sent to the rear speakers.
Refer to the ASA parameter description on page 3-31 for more
information.
• Recommended for home theaters in which the rear speakers
are placed close together.
Default Possible
Parameter Setting Settings
LFE MIX +0.0dB -10.0 to +0.0dB
OUTPUT LEVELS Refer to page 5-32
CUSTOM Refer to page 5-33
Listening mode menu parameter descriptions begin on page 5-34.
Note:
The MUSIC listening mode can only be
activated with the front panel or remote control
Mode buttons.
@@ @** MUSIC MODE ADJUST
&
• Listening mode name differs depending on the encoding
present in the input source, the
DECODING parameter
setting, and the speaker setup. Refer to page 5-22 for more
information.
• Designed for playback of 5.1-channel dts, 5.1-channel matrix-
encoded dts-ES, and 6.1-channel discrete-encoded dts-ES
sources.
• Decodes 5.1 matrix or 6.1 discrete channels from dts(-ES)
sources. The six main channels are full frequency. The .1
channel, often referred to as LFE information, has a limited
frequency range of 120Hz.
• Appropriate for 5.1-channel dts, 5.1-channel matrix-encoded
dts-ES, and 6.1-channel discrete-encoded dts-ES sources.
Default Possible
Parameter Setting Settings
LFE MIX +0.0dB -10.0 to +0.0dB
DECODING AUTO AUTO, ON, OFF
OUTPUT LEVELS Refer to page 5-32
CUSTOM Refer to page 5-33
Listening mode menu parameter descriptions begin on page 5-34.
@@@* MODE ADJUST