Lexmark 2300 Series - Manual (Page 30)

30
Up to 20 transparencies • The rough sides of the transparencies are facing
you.
• The paper guide rests against the edge of the
transparencies.
Note: Since transparencies require more drying
time, we recommend that you remove each
transparency as it exits, and allow it to dry to avoid
ink smudging.
Up to 100 sheets of
coated or premium paper • If the paper came with instructions, you read them
carefully.
• You load the paper vertically against the right side
of the paper support.
• If there is a watermark on the paper, you place
the mark facing away from you.
• You do not force the paper into the All-In-One.
• You squeeze and slide the paper guide to the left
side of the paper.
Load Make sure