Logitech Squeezebox Duet - Manual (Page 38)

Squeezebox ™ Duet User Guide 37
Appendix G: Restoring Default Settings
If you would like to repeat the setup process (choosing your wireless network,
entering your network security password, and selecting your music source),
you can restore Squeezebox Controller to its default settings by going to
Home > Settings > Advanced > Factory Reset.
Alternatively:
Hold down the 1. home button for 12 seconds to force a power down.
While holding down the 2. add button, press the home button again.
The button lights will flash and the Controller will power on.
Release the
3. add button when the Logitech logo appears.
To clear your Squeezebox Receiver’s settings:
Press and hold the button on the front of the player for about 1.
12 seconds or until the light blinks red slowly, and then quickly.
The light will continue to blink red quickly while it resets,
2.
then go solid red briefly before blinking red slowly. At this point,
your Receiver is ready to be set up.