La Crosse Technology WS-7078TWC - Manual (Page 10)

10
for the year. The day, date, and year will be automatically set once
the WWVB signal is received. However, the day, date, and year
can be manually set and will flash respectively in the DATE LCD
during manual programming.
1. Press and hold the “SET” button for 3 seconds, or until “12h”
or “24h” flashes in the DATE LCD.
2. Press and release the “SET” button 5 more times to reach the
Weekday setting mode.
3. The weekday will be flashing in the DATE LCD.
4. Press and release the “CH” button to select the current
weekday.
5. Press and release the “SET” button to confirm and to enter the
numeric-month setting mode.
6. The numeric-month will be flashing in the DATE LCD.
7. Press and release the “CH” button to select the current month.
8. Press and release the “SET” button to confirm the numeric-
month, and to enter the numeric-day setting mode.
9. The numeric-day will be flashing.
10. Press and release the “CH” button to select the current day.
11. Press and release the “SET” button to confirm and to enter the
year setting mode.
12. The default-year will be flashing.
13. Press and release the “CH” button to set the current year.
14. Press and release the “SET” button to confirm and to advance
to the
°F or °C setting mode.
F. Selecting
°F or °C
1. Press and hold the “SET” button for 3 seconds, or until “12h”
or “24h” flashes in the DATE LCD.
2. Press and release the “SET” button 9 times to reach the
°F or
°C setting mode.
3. “
°F” is the default (factory) setting and should be flashing in
the DATE LCD.
4. Press and release the “CH” button to toggle between
°F and
°C.
5. Press and release the “SET” button to confirm your selection
and to advance to the LCD contrast setting.