LG LX-M150 - Manual (Page 11)

11
Operation
Timer Function
With the TIMER function you can have the radio
reception and CD play turned on and off at the
time desired.
1. Press CLOCK to check the current time.
For your reference
If you don’t set clock, timer function doesn’t work.
2. Press TIMER to enter the time setting mode.
TUNER-CD flashes in the display window in
turn.
For your reference
If you want to correct the previous memorized
TIMER setting, press and hold the TIMER button
more than 2 seconds.
- The previous memorized timer on time and
“TIMER” indicators appear in the display.
3. Press SET when the desired function is flashing.
4. 1.When you select the TUNER function,Select
the previous memorized preset number with
PRESET (+/-) on the front panel and press
SET.
- “ON TIME” indicator appears for about 0.5
seconds in the display window and then dis-
appears.
2.When you select the CD function,
- “ON TIME” indicator appears for about
0.5seconds in the display window and then
disappears.
5. Set the hour to switch on by pressing
TUNING (+/-) buttons on the front panel.
6. Press SET to confirm the hour to switch on.
7. Set the minute to switch on by pressing
TUNING (+/-) buttons on the front panel.
8. Press SET to confirm the minute to switch on.
9. Set the hour to switch off by pressing TUNING
(+/-) buttons on the front panel.
10. Press SET to confirm the hour to switch off.
11 . Set the minute to switch off by pressing
TUNING (+/-) buttons on the front panel.
12. Press SET.
13. Adjust the volume level by pressing
TUNING (+/-) buttons on the front panel.
14 . Press SET.
“TIMER” appears in the display window and
the time setting has been completed.
15. Switch the system off.
The selected function is automatically
switched on and off at the time set.
To cancel or check the timer
Each time the TIMER button is pressed you can
select the time set or cancel. You can also check
the time setting status.
To activate or check the time, press the TIMER
button so that “TIMER” appears in the display
window.
To cancel the TIMER, press the TIMER button so
that “TIMER” disappears in the display window.
ote
The unit can also set the clock function in power
off state.
AP_LX-M150A(ENG) 3/2/06 9:54 PM Page 11