Linksys SPA9000 - Manual (Page 104)

97 Appendix C: Dial Plan and Auto-Attendant Scripting for Advanced Users
Configuring the Auto-Attendant
IP Telephony System
The following is the actual code for this example:
<aa>
<form id="nt" type="menu">
<audio src="prompt6" bargein="F"/>
<audio src="prompt7" bargein="F"/>
<audio src="prompt8" bargein="T"/>
<noinput timeout="15" repeat="T"/>
<nomatch repeat="F">
<audio src="prompt3" bargein="T"/>
</nomatch>
<dialplan src="dp1"/>
<match>
<default>
<audio src="prompt2"/>
<xfer name="ext" target="$input"/>
</default>
</match>
</form>
</aa>
<aa>
<form id="dt" type="menu">
<audio src="prompt5" bargein="T"/>
<audio src="prompt8" bargein="T"/>
<audio src="prompt9" bargein="T"/>
<noinput timeout="10">
<xfer name="rep" target="501"/>
</noinput>
<nomatch repeat="T">
<audio src="prompt3" bargein="T"/>
</nomatch>
<dialplan src="dp1"/>
<match>
<case input="1">
<audio src="prompt7" bargein="F"/>
<audio src="prompt8" bargein="T"/>
<audio src="prompt9" bargein="T"/>
</case>
<case input="2">