LevelOne FreeCon WNC-0300 - Manual (Page 18)

●Maximum Power Save – the device consumes the least power and only operates
when there is wireless network activity.
●Power Save – the device consumes the moderate level of power
●Data Encryption –for WEP data encryption feature. If one of the two options is
selected, it is required to select the Authentication mode from the next dropping list.
Auth. Mode: There are three modes available to choose.
Open Authentication – the sender and receiver do not share secret Key for
communication. Instead, each party generates its own key-pairs and asks the other
party to accept it. The key is regenerated when the connection is established every
time.
Shared Authentication – the sender and receiver shares the common key for
data communication, and the key is used for extended length of time.
Auto – depend on the communication to establish, and automatically use the
proper authentication mode.
The following will only be activated to allow for configuration when Encryption is
enabled.
Default Key: select one of the 4 keys to use.
Network Key: enter values to these fields, either in HEX or ASCII formats. You
only have to enter the key that you will use
Key Length: select 64 or 128 bits as the length of the keys
Key Format: ASCII or HEX
17