LevelOne FreeCon WNC-0300 - Manual (Page 55)

54
Authenticator: Wireless Network Access Point
This is the web page configuration in the Access Point that we use.
1. Enable 802.1x security by selecting “Enable”.
2. If MD5 EAP methods is used then you can skip step 3 and go to step 4.
3. Select the Encryption Key Length Size ranging from 64 to 256 Bits that you
would like to use.
Select the Lifetime of the Encryption Key from 5 Minutes to 1 Day. As soon
as the lifetime of the Encryption Key is over, the Encryption Key will be renewed
by the Radius server.
4. Enter the IP address of and the Port used by the Primary Radius Server
Enter the Shared Secret, which is used by the Radius Server.
5. Enter the IP address of, Port and Shared Secret used by the Secondary
Radius Server.
6. Click “Apply” button for the 802.1x settings to take effect after Access Point
reboots itself.
NOTE:
As soon as 802.1x security is enabled, all the wireless client stations that are
connected to the Access Point currently will be disconnected. The wireless clients
must be configured manually to authenticate themselves with the Radius server to
be reconnected.