Dashboard: general settings, As described in sections, Lacie network space 2 – LaCie 2 User Manual
Page 37: User manual
LaCie Network Space 2
• DESIGN BY NEIL POULTON
Administering Your LaCie Network Space 2
User Manual
page 37
4.6. Dashboard: General Settings
This page allows the administrator to modify some of your Network
Space 2’s general parameters.
Machine Name:
Modify the machine name. The machine name
identifies your Network Space 2 in LaCie Network Assistant and on
the local network. The machine name is limited to 15 characters.
Please use alphanumeric characters without spaces or symbols.
Date (mm/dd/yy):
Change the date.
Workgroup:
Modify the Windows workgroup name to set your Net-
work Space 2 to belong to a certain workgroup.
TECHNICAL NOTE:
Mac users connected to a network with Win-
dows com puters can also access shares this way by selecting in the
Finder
Network > [Workgroup] > NetworkSpace2
where “Work-
group” is the name of the Windows workgroup.
Time:
Change the time.
FTP Service:
Toggle this feature on/off to allow your Network Space
2 to be accessible via File Transfer Protocol (FTP).
Time zone:
Change the time zone.
Multimedia Service:
This feature allows your Network Space 2 to act
as a UPnP multimedia server. Files (stored on OpenShare only) will
be available to play on UPnP-enabled players (such as cell phones,
computers, and game consoles). For information on using your
Network Space 2 to stream files to your UPnP devices, see
. For information on using the Network Space 2 as
an iTunes music server, see section
. Note that if you’ve
just added new content to the Network Space 2, it could take a few
minutes before they are available to UPnP/DLNA-certified players/
adapters.
NTP Server:
Click the box, then click the field to the right and type
the address of a Network Time Protocol server to provide the time
for the Network Space 2 automatically. While NTP is selected, you
can’t modify the time and date settings.
Fig. 53