Lowrance electronic X96 - Manual (Page 34)

28
4. ARROW KEYS – Used to navigate through the menus, make menu
selections, move the sonar chart cursor and enter data.
5. ENT – Allows you to accept values or execute menu commands.
6. EXIT – Lets you return to the previous screen, clear data or erase a
menu.
7. ALARM – Shortcut to the sonar alarms menu. It allows you to
choose which alarms to use and when.
8. ZOUT – (Zoom Out) – Lets you zoom out the screen to see the full
sonar chart display, showing the entire water column from surface to
bottom.
9. ZIN – (Zoom In) – Lets you zoom in the screen. It enlarges fish
signals, bottom detail and other sonar returns.
Power/lights on and off
To turn on the unit, press PWR .
To turn off the backlight, press PWR again. The unit has three
backlight levels to select from. Repeatedly pressing PWR will cycle
through the backlight settings.
Turn off the unit by pressing and holding the PWR key for five seconds.
Main Menu
The sonar unit has a Main Menu, which contains function commands
and setup option commands. The instructions in this section will deal
only with sonar functions, basic commands that make the unit show
sonar signals on your screen. Your sonar unit will work fine right out of
the box with the factory default settings. But, if you want to learn
about the various sonar options, see Section 4, Sonar Options & Other
Features.
You can access the Main Menu from any of the Page screens by
pressing
MENU | MENU . To clear the menu screen and return to the page
display, press EXIT . (Remember, our text style for MENU | MENU means
you need to press the Menu key twice. See a full explanation of our
instruction text formatting on page 3, Instructions = Menu Sequences.)