Lowrance electronic X96 - Manual (Page 59)

53
HyperScroll

See the entry on Ping Speed, which controls the HyperScroll feature.
Noise Rejection
See the entry on Advanced Signal Processing in this section.
Overlay Data
To change the digital data shown on top of the sonar page:
1. Press MENU |
↓ to
O VERLAY D ATA
| ENT .
2. To add data or remove data, use
↓ or ↑ to highlight Press ENT to
add| ENT.
3. Use
↑ ↓ to highlight a category and press
ENT , which will check or
uncheck the overlay data option. Check the categories you want to
to display and uncheck those you want to remove.
4.
Overlay Data command on the Sonar Menu (left). Overlay Data Shown
selection menu (right).
5. When selected, the data type shifts to the top of the data list and a
check mark appears beside the data type. (If you wish, you may
now use
↓ or ↑ to select other Data Types to display.)