Laser:enable:outoff – Lightwave Communications LDX-3232 User Manual
Page 74
C O M M A N D R E F E R E N C E
LDX-3232 Device-Dependent Command Reference
58
LDX-3232
C H A P T E R
4
The LASer:ENABle:OUTOFF command sets the status outoff enable register of the
LASER operations (things that will turn the LASER output off).
Syntax Diagram
Parameters
An <nrf value> whose sum represents the enabled bits:
Notes
The enabled LASER outoff bits can be read by using the LASer:ENABle:OUTOFF?
query.
The enable registers normally retain their values at power-up (as they were at power-
down) unless the power-on status clear flag is set true (for more information see the
*PSC definition, in the GPIB-IEEE488 specification).
The factory default value for this register is #B0000100000001000, #H808, or 2056
decimal.
Examples
"LAS:ENAB:OUTOFF 9" -action: enables the LASER status outoff register so that Power
limit and LASER current limit conditions will cause the LASER output to be turned off.
"Las:Enab:Outoff #HE0B" -action: enables the LASER status outoff register so that any
or all of the above conditions will cause the LASER output to be turned off.
LASer:ENABle:OUTOFF
F
RONT
P
ANEL
R
EMOTE
1
LASER Current Limit
256
N/A
2
LASER Voltage Limit
512
Output is out of tolerance*
4
N/A
1024
N/A
8
Power limit (with output on)
2048
N/A
16
N/A
4096
N/A
32
N/A
8192
N/A
64
N/A
16384
N/A
128
N/A
32768
N/A
:
LAS
<white
space>
<nrf
value>
:
ENAB
:
OUTOFF