Life Fitness Treadmill - Manual (Page 36)

5.2 C
ONFIGURATION
S
ETTINGS
CONFIGURATION FACTORY
SETTING DEFAULT DESCRIPTION
LANGUAGE ENGLISH The language of the MESSAGE CENTER display. Choices
include Portugese, Spanish, Dutch, Japanese, Italian, French,
and German.
MAXTIME SETUPOFF This feature enables fitness club managers to set workout
duration limits during peak and non-peak hours of club traffic.
If the setup is off, no duration limits are set. See the topic
titled Using the MaxTime TM Setup, which appears on the
following page.
STANDBY MODE SETUPOFF This feature enables fitness club managers to set periods at
which which the treadmill automatically powers up or
powers down. See the topic titled Using the Standby Mode
Setup, which appears on a following page.
ENGLISH/METRIC UNITS ENGLISH The measurement unit type for weight, distance, and speed.
CUSTOM WORKOUT ENTRY N/A See Programming Custom Workouts in Section 4.
TELEMETRY ON Switching on the telemetry feature makes it possible to use the
Polar®-compatible Heart Rate Zone Training exercise chest
strap for monitoring the heart rate.
SMART STOPON This feature automatically pauses the workout if the user steps
off the belt.
MAXIMUM SPEED 12.0 (MPH) for 9500HR This is the fastest speed at which the treadmill can run.
12.0 (MPH) for 9700HR The value can be increased to 15.0 MPH on the 9700HR.
MINIMUM SPEED 0.5 (MPH) This is the slowest speed at which the treadmill can run.
PAUSE TIMEOUT 1 (minute) This is the maximum time during which a workout can remain
in pause mode.
WATTS DISPLAY OFF (Int'l: ON) If this option is enabled, the MESSAGE CENTER displays the
Watts equivalent of the step rate.
METS DISPLAY OFF If this option is enabled, the MESSAGE CENTER displays the
METs equivalent of the step rate.
PACE DISPLAY ON This feature displays the rate of minutes per mile.
CALORIE PER HOUR DISPLAY ON (Int'l: OFF) If this option is enabled, the MESSAGE CENTER displays the
number of calories burned per hour during the workout.
DISTANCE CLIMBED DISPLAY OFF The total distance climbed, based on the incline and speed of
the treadmill.
WAX REMINDER OFF After the first 100 hours, then every 168 hours, the MESSAGE
CENTER displays, "MAINTENANCE REMINDER - CLEAN
THE NOZZLE."
ACCELERATION RATE 3 The rate at which the treadmill speeds up to the selected speed,
ranging from 1 (slowest) to 5 (fastest).
DECELERATION RATE 3 The rate at which the treadmill speeds up to the selected speed,
ranging from 1 (slowest) to 5 (fastest).
ERASE CUSTOM WORKOUTS N/A This option erases all custom workouts in a single step.
MAXIMUM INCLINE 15.0 This option changes the maximum incline grade to a value
lower than 15 percent.
36