Lincoln Electric WELD-PACK 100 PLUS IM546 - Manual (Page 35)

D-1 MAINTENANCE
WELD-PAK 100
MAINTENANCE
SAFETY PRECAUTIONS
ELECTRIC SHOCK can kill.
• Disconnect input power by removing
plug from receptacle before working
inside WELD-PAK 100. Use only ground-
ed receptacle. Do not touch electrically
“hot” parts inside WELD-PAK 100.
• Have qualified personnel do the mainte-
nance and trouble shooting work.
ROUTINE MAINTENANCE
POWER SOURCE COMPARTMENT
No user serviceable parts inside! Do not attempt to perform
service in the power source (fixed) side of the WELD-PAK
100. Take the unit to an authorized Lincoln Service Center if
you experience problems. NO maintenance is required.
WIRE FEED COMPARTMENT
1. When necessary, vacuum accumulated dirt from gearbox
and wire feed section.
2. Occasionally inspect the incoming guide tube and clean
inside diameter is necessary.
3. Motor and gearbox have lifetime lubrication and require no
maintenance.
FAN MOTOR
Has lifetime lubrication — requires no maintenance.
WIRE REEL SPINDLE
Requires no maintenance. Do not lubricate shaft.
WARNING