Life Fitness Essential FT6 - Manual (Page 20)

19
H
ILL
C
LIMB
This program alternates intervals of high and low elevations. Unlike the FAT BURN workout, the high intervals build
to a peak and then gradually decline.
T
ARGET
T
IME
This workout targets a specific time duration as a goal. By default, the elevation or speed for this workout do not
change automatically, but may be changed manually with the SPEED or ELEVATION ARROW keys. Once the dura-
tion target is acheived, the workout ends.
T
ARGET
D
ISTANCE
This workout targets a specific distance as a goal. By default, the elevation or speed for this workout do not change
automatically, but may be changed manually with the SPEED or ELEVATION ARROW keys. Once the distance target
is acheived, the workout ends.
T
ARGET
C
ALORIES
This workout targets a specific number of calories burned as a goal. By default, the elevation or speed for this work-
out do not change automatically, but may be changed manually with the SPEED or ELEVATION ARROW keys. Once
the calorie target is acheived, the workout ends.
4.4 C
USTOM
W
ORKOUTS
The user may pre-set up to two workouts with personal setup information, such as workout type and age, and then store
the workouts in the console memory. Then, in future workouts, the user can select one of these CUSTOM WORKOUTS
and begin exercising immediately.
S
ETTING
U
P AND
U
SING
C
USTOM
W
ORKOUTS FOR THE
F
IRST
T
IME
CUSTOM WORKOUTS must be set up before they can be used. The SPEED and INCLINE settings are saved
throughout the program. To set up a CUSTOM WORKOUT:
1. With the treadmill powered up and the safety key engaged, press the CUSTOM A or CUSTOM B key.
2. Press ENTER.
3. Enter age when prompted by the MESSAGE CENTER.
4. Enter the duration when prompoted by the MESSAGE CENTER.
5. Press START.
The treadmill computer stores one change in speed or incline per minute. A total of 15 speed or incline changes may
be saved throughout the workout.