Life Fitness C9I - Manual (Page 24)

23
E DITING S ETTINGS FOR W ORKOUTS S AVED U NDER M Y W ORKOUT
Use the following steps to change settings for a stored workout or to change a workout name.
1. Press the MY WORKOUT key.
2. Scroll through the user names displayed in the MESSAGE CENTER, either by repeatedly pressing the MY
WORKOUT key or by pressing the ARROW keys.
3. When the desired name appears, press and hold the ENTER key until the console beeps twice.
4. The MESSAGE CENTER displays the prompt, “PRESS WORKOUT PROGRAM KEY TO REPROGRAM
WORKOUT OR PRESS MY WORKOUT KEY TO EDIT YOUR NAME”. At this prompt, change the workout
settings, or change the workout name.
To change a settings for a stored workout:
5. Press the WORKOUT PROGRAM key.
6. The MESSAGE CENTER displays the prompt,
“REPROGRAM WORKOUT MODE - SELECT
WORKOUT NOW.” Scroll through the
workouts displayed in the MESSAGE
CENTER, either by repeatedly pressing the
WORKOUT PROGRAM key or by pressing the
ARROW keys. When the desired workout
appears, press ENTER.
7. Enter setup information as prompted by the
MESSAGE CENTER. Use the ARROW keys to
scroll through displayed values, and press
ENTER to confirm the desired value. Once all
information is entered, the MESSAGE
CENTER displays WORKOUT SAVED.
To exit the “reprogramming” mode at any time
without saving the workout changes, press the
STOP key twice.
To change a workout name or User Name
5. Press the MY WORKOUT key.
6. The MESSAGE CENTER displays the prompt,
“SELECT LETTER USING MY WORKOUT KEY
AND CHANGE LETTERS USING ARROW KEYS.”
The workout name appears in the MESSAGE
CENTER, with the first letter blinking. Scroll to the
desired letter, number, or punc-tuation symbol, using
the arrow key. When the desired character appears,
press MY WORK-OUT to move on to the next letter.
Repeat this step for all characters.
7. Press ENTER to save the new name. The
MESSAGE CENTER displays, “USER NAME
SAVED.”
To exit this mode without saving the name change,
press the STOP key twice.
TIP: The User Statistics feature, which stores workout
statistics, identifies each stored workout as a “User
Name.” By factory default, the workouts are stored
under the names WORKOUT 1 through WORKOUT
7. It may be desirable to assign user names to the
workouts. See Section 5, titled User Menu, for more
information.