Life Fitness C9I - Manual (Page 25)

24
5
I
NTERNAL
S
ETTINGS
5.1 O
PTIONAL
S
ETTINGS
Use the Optional Settings feature to change default settings, or to enable or disable certain programs or displays on
the Lifecycle bike console.
E NTERING AND U SING THE O PTIONAL S ETTINGS F EATURE
To enter the Optional Settings, hold down the UP ARROW key, start pedaling, and press START on the C7i, or
simply start pedaling on the C9i. After the console display lights up, press the ENTER key until the MESSAGE
CENTER displays MANAGER’S SETTINGS. Use the ENTER key to scroll forward through each displayed setting,
and use the CLEAR key to scroll backward. To change a displayed setting, press the UP or DOWN arrow key until
the MESSAGE CENTER displays the desired setting, and then press ENTER. To exit Optional Settings, press the
CLEAR key repeatedly until the MESSAGE CENTER displays SELECT WORKOUT OR PRESS QUICK START.
The following chart lists and describes each optional setting.
Setting
MAX WORKOUT
ENGLISH/METRIC
UNITS
WATTS DISPLAY
METS DISPLAY
WATTS PROGRAM
METS PROGRAM
CAL/HR DISPLAY
STATISTICS
PHOTO SHOOT
Default Value
60
ENGLISH
OFF
OFF
OFF
OFF
OFF
Description
This is the maximum possible duration in minutes for a workout. The
value can range from 1 to 99.
This option determines the units of weight measurement used by workout
programs.
If this option is enabled, the MESSAGE CENTER displays the Watts
equivalent of the pedaling rate.
If this option is enabled, the MESSAGE CENTER displays the METs
equivalent of the pedaling rate.
If this option is enabled, the Watts program becomes an available
workout.*
If this option is enabled, the METs program becomes an available
workout.*
If this option is enabled, the MESSAGE CENTER displays the number of
calories burned per hour during the workout.
This option displays complete usage statistics on the Lifecycle bike, such
as total hours and the total number of times each workout is selected.
Use the ARROW keys to scroll through each statistic.
This feature lights up the console display with “dummy” values to depict
how the display looks.
* Applies to C9i only.