Life Fitness LIFECYCLE M051-00K39-A167 User Manual
Page 33
32
6
S
ERVICE AND
T
ECHNICAL
D
ATA
6.1
P
REVENTATIVE
M
AINTENANCE
T
IPS
The Lifecycle exercise bike is backed by the engineering excellence of Life Fitness and is one of the most rugged and
trouble-free pieces of exercise equipment on the market today. Commercial Life Fitness products have proven to be
durable in health clubs, colleges, and military facilities the world over. This same technology, engineering expertise, and
reliability have gone into the Lifecycle exercise bike.
NOTE: The safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear.
Keep the equipment out of use until defective parts are repaired or replaced. Pay special attention to parts that are sub-
ject to wear as outlined in the Preventive Maintenance Schedule. See Section 6.2.
REMARQUE : pour conserver un matériel sûr, il convient de l'inspecter régulièrement afin de déceler tout signe d'usure
ou d'endommagement. N'utilisez pas l'appareil tant que les pièces défectueuses n'ont pas été réparées ou remplacées.
Portez une attention toute particulière aux pièces qui s'usent, comme indiqué ci-dessous.
The following preventive maintenance tips will keep the Lifecycle exercise bike operating at peak performance:
•
Locate the bike in a cool, dry place.
•
Keep the pedal straps fastened securely when using the bike.
•
Keep the display console free of fingerprints and salt build-up caused by sweat.
•
Use a 100% cotton cloth, lightly moistened with water and mild liquid detergent, to clean the bike. Other fabrics,
including paper towels, may scratch the surface. Do not use ammonia or acid-based cleaners.
•
Long fingernails may damage or scratch the surface of the console; use the pad of the finger to press the selec-
tion buttons on the console.
•
Clean the housing thoroughly on a regular basis.
NOTE: A non-abrasive cleaner and soft cotton cloth are strongly recommended for cleaning the exterior of the unit. At no
time should cleaner be applied directly to any part of the equipment; apply the non-abrasive cleaner on a soft cloth, and
then wipe the unit.