Lexmark Intuition S505 - Manual (Page 19)

• Turn the printer off, wait about 10 seconds, and then turn the printer back on.
Using the Service Center to solve printer problems
The Service Center provides step-by-step troubleshooting help and contains links to printer maintenance
tasks and customer support.
To open the Service Center, use one of these methods:
Method 1 Method 2
If it appears on an error message dialog, click the
For additional assistance, use the Service Center
link.
1 Click or Start.
2 Click All Programs or Programs, and then select the
printer program folder from the list.
3 Select Printer Home.
4 From the Support tab, select Service Center.
If Troubleshooting does not solve your problem
Visit our Web site at http://support.lexmark.com to find the following:
• Knowledgebase articles with the latest information and troubleshooting for your printer
• Live online technical support
• Contact numbers for telephone technical support
Setup troubleshooting
• “Incorrect language appears on the display” on page 19
• “Printhead errors” on page 19
• “Software did not install” on page 20
• “Print job does not print or is missing pages” on page 21
• “Printer is printing blank pages” on page 21
• “Printer is busy or does not respond” on page 22
• “Cannot delete documents from the print queue” on page 22
• “Cannot print through USB” on page 22
Incorrect language appears on the display
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the
following:
C HANGE THE LANGUAGE USING THE PRINTER MENUS
1 From the printer control panel, press .
2 Press the arrow buttons to scroll to Defaults, and then press .
3 Press the arrow buttons to scroll to Set Defaults, and then press .
4 Press the arrow buttons to scroll to Use Factory, and then press .
5 Complete the initial printer setup.
C HANGE THE LANGUAGE USING A BUTTON COMBINATION ( IF YOU CANNOT READ THE CURRENT
LANGUAGE )
1 Turn the printer off.
Note: If you have set the Power Saver timeout in the Setup menu, then press and hold for three
seconds to turn off the printer.
2 Press and hold down and , and then press and release to turn the printer on.
Note: Do not release and until Language Selection appears on the display, indicating
that the printer has been reset.
3 Complete the initial printer setup.
Printhead errors
If the "Before you troubleshoot" checklist does not solve the problem, then try the following:
19