LaCie Mobile Disk - Manual (Page 3)

1. Connect the USB cable to the drive.
2. Connect the USB cable to your
computer.
3. Refer to the pre-loaded User Manual for
more detailed information and to install
the included software.
For the latest documentation and software
updates, please visit www.lacie.com and click
on “Support and Downloads.”
Optional: Some computers limit USB bus power.
If your drive does not power on after connecting
the USB cable, you may need to connect the USB
power sharing cable to power your drive.
Then reconnect the USB cable to the drive
and to the computer.
NOTE: The LaCie Hard Drive is pre-formatted
as a FAT32 volume. Mac Users: Mac OS X 10.3
or later required to mount FAT32 volumes
over 127GB.
For optimum performance:
Mac users: Reformat in HFS+.
Windows users: Reformat in NTFS.
See User Manual for more details.
Plug-and-Play setup for Windows and Mac os X
Optional