Lowrance electronic 540c Baja - Manual (Page 106)

98
To move overlaid data:
You may find it useful to move or rearrange overlay data on your dis-
play.
1. From one of the Map Pages, press
MENU
| ↓ to
O
VERLAY
D
ATA
|
ENT
.
2. You will see a list of the overlay data currently displayed. Select the
item you want to move and press
ENT
| → to
M
OVE
|
ENT
.
3. The data begins to flash on your screen. Use ↑ ↓, ← → to move the
data to a new location on the screen.
4. Press
EXIT
|
EXIT
to return to the map display.
NOTE:
The Customize command and the Overlay Data command both use
the same information categories. The difference between the two
commands is that Customize changes only the data in digital data
boxes, while Overlay Data changes the data on the floating freely
on the screen but does not alter data in digital data boxes. For in-
formation on customizing digital data boxes see Customize Page
Displays on page Error! Bookmark not defined..
Trip Distance set to small size in the Overlay Data Shown menu (left).
Trip Distance set to Large size (right).
To change displayed data font size:
1. From the Map, press
MENU
| ↓ to
O
VERLAY
D
ATA
|
ENT
.
2. Press ↓ ↑ to select the desired data type, then use ← → to enlarge or
reduce the size of the overlay data on the map display.
3. Press
EXIT
to return to the map display. The selected data type will
be displayed in the new size. (To change the font size for another Data
Type, repeat these steps, beginning with step 2 above.)