Lucent Technologies 108286063 User Manual
Page 14
Change Descriptions
12
Issue 2 May 1998
56. Agents could not remove themselves from a skill (using the feature access
code for remove agent skill) without going directly back to the auto-in
mode. Attempts to go into the aux-work mode failed and went to the
auto-in mode instead.
57. Only the calling trunk information was displayed at the called station for
trunk calls transferred out of AUDIX. Now, the AUDIX port name, followed
immediately by the calling trunk information, is displayed.
58. Two simultaneous ISDN data calls to a hunt group of data endpoints
resulted in the second call not completing.
59. To increase the T.305 timer for the Nortel DMS COs, a new protocol
version for the US (country code 1) was created. This new protocol version
option is labeled as “c.” The new country code/protocol version is
automatically assigned a 30-second value to the T.305 timer.
60. Customers who had large switch translations for upgrades could
experience problems saving translations during and/or after the
upgrades.