Lucent Technologies CELLPIPE 7820-0766-004 - Manual (Page 15)

Setup
Console setup
CellPipe™ 20 Series User’s Guide 2-5
Set your communications software to connect with the following settings:
• Connection—Specify a direct connection from the unit to the computer.
• Serial port—Specify the serial port on the computer the software is to use.
• Terminal type—Specify VT100.
• Duplex—Specify Full. This is the default for most communications software.
• Bits per second—Specify 9600.
• Data bits—Specify 8.
• Parity—Specify None.
• Stop bits—Specify 1.
• Flow control—Specify None.
A >> prompt appears when the connection is completed.