Lenoxx Electronics PDV-705 - Manual (Page 23)

IB-PDV705-WM-E-010506
- LT/RT
Select this item when the disc supporting Pro Logic Dolby Stereo is played. You have the
opportunity to hear a program’s soundtrack in the most accurate and realistic presentation
possible.
- STEREO
For 5-channel output, the left and right track signals are output simultaneously; For 2-channel
output, the ordinary stereo signal is output.
INITIAL SETTING
LANGUAGE SETUP (On Screen Display, AUDIO, SUBTITLE & MENU)
These items allow you to preset the OSD language (OSD
= On Screen Display), audio language, subtitle language,
and menu language that will always be used for every
disc on this player (if the language selected is available).
AUDIO SETUP (DIGITAL OUT) - Only for use in COAXIAL connection mode
A. SPDIF/RAW
The coaxial output is connected with a receiver that
accepts Dolby Digital or other signals. It works for
most of the coaxial connections.
B. SPDIF/PCM
The coaxial output is connected with a receiver that
accepts PCM SIGNALS.
SPEAKER SETUP (DOWNMIX)
NOTE 1: If the language selected is not available on
the disc, the original language designated
by each disc will be selected.
NOTE 2: You can change the AUDIO or SUBTITLE
language easily by pressing the AUDIO or
SUBTITLE button (refer to pages 11).
LANGUAGE SETUP
OSD LANGUAGE ENGLISH
SPANISH
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
FRENCH
AUDIO SETUP
AUDIO OUTPUT SPDIF/RAW
SPDIF/PCM
EXIT SETUP
SPEAKER SETUP
DOWNMIX LT/RT
STEREO
EXIT SETUP
VIDEO SETUP
These settings allow you to set the Video signals’
Brightness, Contrast, Hue, and Saturation.
BRIGHTNESS - The brightness of the Video signals.
CONTRAST - The contrast of the Video signals.
HUE - The hue of the Video signals.
SATURATION - The saturation of the Video signals.
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
EXIT SETUP
12
10
8
6
4
2
0
Your DVD player can be connected to a home theater system with coaxial digital audio jack to
realize high quality sound effects, digital audio output allows you to select SPDIF/RAW or SPDIF/
PCM digital signal.
When you use the DVD player itself or if you connect
the DVD player to your TV or other amplifier with the
supplied A/V cable, you can enter the SPEAKER SETUP
to set the DOWNMIX, Downmix audio output setup allows
you to select LT/RT or STEREO audio output mode.
22
IB-PDV705-WM-E-010506.pmd 4/3/2006, 9:24 AM 23