Lenoxx Electronics PDV-705 - Manual (Page 26)

IB-PDV705-WM-E-010506
Remedy
TROUBLE SHOOTING
Symptom
25
The picture seems
squeezed or stretched.
The LCD mode and TV type you are in may be wrong for this
movie, try changing the LCD and TV type setting for standard
or widescreen. See pages 20 & 21.
Set needs to be reset.
Reset the DVD player by removing the battery pack and discon-
nect AC adaptor for 1 minute, then replace to reset. (The player
may not be operating properly due to lightning, static electricity,
damaged or wrong discs, or some other external factors).
The player’s controls
don’t work or the player
can not work properly.
G
en
er
al
1. The disc may be dirty, try cleaning the disc.
2. Make sure the disc is not upside down.
3. The region code is not 1, in this case, the disc can not be used.
4. Disc may not be industry standard or it may be an illegal copy.
Only use legally sold movies not pirate copies.
A specific disc does not
play.
This is normal for high speed reading of DVD discs. Cabinet vibrates or hums.
The REMOTE CON-
TROL unit does not
work.
1. Check that the remote’s batteries are installed correctly.
2. The remote’s batteries are weak or depleted, replace them with
new ones (refer to page 8).
3. Point the remote control unit at a distance of less than 20 feet
(6m) from the DVD player.
4. Remove any obstacles between the remote control unit and remote
control sensor, also make sure the lens on the remote is not dirty.
Some discs may have sections which prohibit rapid advance (or rapid
reverse), especially on opening screens or during FBI warnings. No rapid advance or
rapid reverse play.
1. Press AUDIO button several times. The disc may have been
set to DTS output or a blank audio channel on multiple language,
please select AC-3 output or reset to the main language (refer to
page 11).
2. Adjust the DVD player’s volume.
3. Make sure the AUDIO output connection and setting are
correct. See details on page 22.
4. Ensure that the equipment is connected properly.
5. Ensure that the input setting for the TV and stereo system
are correct.
6. Adjust volume setting on your TV’s remote.
7. Make sure the headphones are detached from the DVD player.
8. The movie is paused, press play.
9. The movie is in search or fast play or other speed related play.
There is no sound in these cases. Only normal play has sound.
No sound from your
TV or speakers.
The color buttons have
no function or have
less function.
The disc you used is a copied one, please replace it with a fresh
original disc.
IB-PDV705-WM-E-010506.pmd 4/3/2006, 9:24 AM 26