Lumens Technology PS600 - Manual (Page 23)

5.4 Network Setting
Step1：Confirm the Ethernet has been connected
Step2：Press <MENU> button on the control panel or entry the
OSD Menu by remote control
Step3：Select “Advance”
¾ DHCP：Dynamic Host Configuration Protocol is an Internet
protocol for automating the configuration of computers.
※ Note：Please confirm the DHCP server is available before
use it.
¾ Default is Disable：For static IP address
Please key in the IP, Net Mask, Gate Way value and save
them if you know. Otherwise, please consult the network or
MIS administrator to get help.
¾ Enable：For public IP address
Please restart the Visualizer after the DHCP was enabled. The
IP, Net Mask and Gate Way value can be got automatically by
DHCP.
English - 22