Loading a disc, Securing a disc in a vertically mounted drive, Manually ejecting a disc – Lenovo ThinkPad 40Y8706 User Manual
Page 20: Using media, Handling and caring for a disc, Loading, Disc, Securing, Vertically, Mounted
Loading
a
disc
1.
Press
the
Eject
button.
The
tray
slides
out
of
the
drive.
2.
Place
a
disc
in
the
tray
with
the
label
facing
up.
3.
Close
the
tray
by
gently
pushing
the
tray
in
until
it
latches.
Attention:
Do
not
use
force
or
insert
foreign
objects
to
open
the
tray.
If
your
tray
does
not
open
when
you
press
the
Eject
button,
see
for
more
information.
Securing
a
disc
in
a
vertically
mounted
drive
The
drive
has
four
retainers
molded
into
the
loading
tray
for
vertical
mounting
operation.
To
insert
a
disc,
place
it
in
the
lower
two
retainers
before
closing
the
tray.
To
remove
a
disc,
open
the
tray
and
lift
the
disc
from
the
two
lower
retainers.
Manually
ejecting
a
disc
If
you
press
the
Eject
button
and
the
tray
does
not
slide
out,
turn
off
the
computer
and
straighten
a
large
paper
clip
to
form
a
tool,
as
shown
in
the
illustration.
The
straightened
end
must
extend
at
least
45
mm
(1.8
in.).
Insert
the
extended
end
into
the
manual-eject
hole
on
the
front
of
the
drive.
Push
the
paper
clip
until
the
tray
opens.
Gently
pull
out
the
tray
until
you
can
remove
the
disc.
45 mm
1.8 in
Using
media
Handling
and
caring
for
a
disc
Carefully
handle
and
clean
discs,
especially
writable
media
types
such
as
CD-R
and
CD-RW
discs,
so
that
they
remain
readable.
You
can
prolong
the
life
of
your
discs
by
using
the
following
precautions:
v
Always
store
discs
in
their
original
packaging.
v
Always
store
discs
out
of
direct
sunlight.
6
ThinkPad
Super
Multi-Burner
Ultrabay
Slim
Drive:
User’s
Guide