Lennox Hearth X-FIRES-1000-LP - Manual (Page 22)

22
Note: The actual dimensions are shown in millimeters. The
fractional dimensions are converted from millimeters and are
rounded to the nearest 1/16”.
KEY:
D1 = Distance from mounting surface to rear entry point
D2 = Distance from mounting surface to center of side entry point
D3 = Distance from mounting surface to regulator gas entry point
D
3
D
1
D
2
REGULATOR GAS ENTRY POINT
D1
D3
D2
Finished Wall
TOP VIEW
Fireplace
Regulator Gas Entry Point
Model D1 D2 D3
X-fires™ 1000
9/16”
(15mm)
1-9/16”
(40mm)
4-1/8”
(105mm)
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
GAS ENTRY POINT DIMENSIONS