Lindy USB 2.0 4+1 Port PCI Card 51084 - Manual (Page 3)

Hardware Installation
1. Power off your computer
2. Remove the case cover screws and remove the case
3. Locate a spare 32-Bit PCI slot
4. Unscrew the PCI slot blanking plate and retain the screw
5. Carefully insert the PCI card into the slot. Make sure it is
seated correctly
6. Secure the card using the retained screw
7. Replace the case and reinstall the screws
8. Power on your computer and proceed with driver installation
Driver Installation (Windows)
1. Boot up the operating system
2. Insert the Driver CD into your CD-ROM drive and locate the
following path -
\USB\70580\PC Driver
3. Click the Setup.exe file to begin installation. After the files are
copied you will be asked to restart your computer. Select Yes,
I want to restart my computer now