Lincoln FUSION TOASTER 2040 - Manual (Page 14)

Fusion Toaster Series Service Manual 14
OPERATING INSTRUCTIONS
Prior to operating your new Fusion Toaster, it is important to understand the different programmable options
available to you. Following is a chart to better illustrate the different programmable options that are available.
MENU ITEMS DESCRIPTION
Temperature Intensity
Temperature Intensity refers to the temperature in which the unit is toasting. This is shown on
the display board as a unit of measure (low to high) between 0.5 – 10.0.
Temperature Intensity Balance The Fusion Toaster will allow you to determine where the heat will emanate. You have the
ability to program your toaster so that more (or less) heat will emanate from the top or bottom of
the toaster. This is shown on the display board as a unit of measure between 5 – 200.
• Display reading between 5 – 95 refers to more top heat / less bottom heat.
• Display reading between 110 – 200 refers to more bottom heat / less top heat.
• Display reading of 100 refers to equal top and bottom heat.
Belt Speed Belt Speed refers to how quickly the food item travels through the toaster. This is shown on the
display board as a unit of measure (fast to slow) between :15 seconds and 5:00 minutes.
Menu Name Menu Name refers to the names available for programming in the four “Profile-Preset” buttons.
Each menu will be listed on the display as “Menu 1, 2, 3, or 4” which corresponds to the
numbered buttons. The operator has the option of changing these names (see programming
instructions).
POWER-UP TOASTER
1. Turn the “On / Off” Switch to the “ON” position. The green light will illuminate.
DANGER! Do not work around conveyor belt with long hair, loose clothing, or dangling jewelry.
Getting caught in the belt could result in serious injury.
!
ON-OFF SWITCH
PROFILE – PRESET BUTTONS
(1 THROUGH 4)
MANUAL PRESET
TEMPERATURE
UP-SCROLL & DOWN-SCROLL
BUTTONS
BELT SPEED
BELT DIRECTION
ENERGY SAVER / POWER DOWN
DISPLAY SCREEN
ON-OFF SWITCH