Lincoln FUSION TOASTER 2040 - Manual (Page 15)

Fusion Toaster Series Service Manual 15
MENU ITEMS
The Fusion Toaster is equipped with four (4) separate menu items to allow for multiple menu settings. These menu
items are shown on the display as ‘Menu 1,’ ‘Menu 2,’ ‘Menu 3,’ or ‘Menu 4’ depending on which menu is selected.
Additionally, these menus can be reprogrammed with a specific food item name such as “sandwich,” “quesadilla,’
“pretzel,” “cookie,” etc. To access each menu, simply press and release the requisite “Profile Preset” button (1
through 4).
PROGRAMMING MENU ITEMS
The Fusion Toaster allows for each of the four saved menu items to be programmed for temperature intensity,
temperature intensity balance, belt speed, and menu name. To program a menu item, follow the steps listed below.
1. Press and hold the “Profile Preset” button you wish to program for approximately 5 seconds. Upon
entering the programming mode, the display will “flash” the temperature intensity setting (a figure between
0.5 & 10.0).
2. Press the “”Up-Scroll” or “Down-Scroll” button to change the temperature intensity to desired setting. To
save the setting simply press and release the “Profile Preset” button to advance to the next menu item.
(Notice that in this illustration the menu has been changed from “6.5” to “10.0” which will now “scroll”
through the display.)
Display
Profile Preset Buttons
Up-Scroll & Down-Scroll Buttons