Lenovo 3000 C100 - Manual (Page 36)

Status indicators
The system status indicators show the status of the computer, as follows:
1 2 3 4 5
6 7 8 9
Indicator Meaning
1 Device Access A hard disk drive or an optional drive is being used to read or
write data.
Note: When this indicator is blinking, do not put the computer
into standby mode, remove the device from the bay, or turn off
the computer.
2 3-1 Digital
Media Reader
A card in 3 in 1 card slot is being used to read and write data.
Note: When this indicator is blinking, do not put the computer
into standby mode, remove the card from the slot, or turn off the
computer.
3 Caps lock Caps Lock mode is enabled. You can enter all alphabetic
characters (A-Z) in uppercase without pressing the Shift key. To
enable or disable Caps Lock mode, press the CapsLk key.
4 Num lock The numeric keypad on the keyboard is enabled. To enable or
disable the keypad, press and hold the Fn key, and press the
NmLk key.
5 Bluetooth status
R
Green:
The Bluetooth wireless is operational, and the radio link is
ready for use.
Blinking green:
Data is being transmitted.
Note: Some models do not have this indicator.
6 Power status Green:
The computer is operating.
Off:
The computer is powered off, or in hibernation mode.
Blinking green:
The computer is in standby mode.
7 Standby status
(continued)
Product overview
32 MT 0761