Lowrance electronic M68C IceMachine - Manual (Page 120)

112
5. Move the cursor to the next point in the route, a spot where you need
to turn or change direction, and press
ENT to set the next waypoint.
6. Repeat step five until the route reaches your destination.
7. To save your route, press EXIT . The M68 reverts to the Edit Route
screen, with the route automatically named "Route 1" and stored in the
M68's internal memory.
You can edit the route and run other commands, but if you are finished
with the route for now, r e t u r n t o t h e l a s t p a g e d i s p l a y e d b y
p r e s s i n g
EXIT | EXIT | EXIT | EXIT .
Delete a Route
1. From the
N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .
2. Press
↓ to route name|
ENT .
3. Press
→ to
D ELETE R OUTE
| ENT |
← to
Y ES
| ENT .
Tip:
You can also delete all routes at once:
1. From the
N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .
2. Press
→ to
D
ELETE
A
LL
| ENT |
← to
Y
ES
| ENT .
Edit a Route
You can edit the route name if you wish.
1. From the N
AVIGATION
P
AGE
, press MENU | ENT or from the M
AP
P
AGE
press MENU | MENU |
↓ to
R
OUTE
P
LANNING
| ENT .
2. Press
↓ to route name|
ENT |
→ to
E DIT R OUTE N AME
| ENT .
3. Press
↑ or ↓ to change the first character, then press → to move the
cursor to the next character and repeat until the name is correct, then
press
ENT . Return to the previous page by pressing
EXIT | EXIT | EXIT | EXIT .
You can edit the route by adding and removing waypoints.
1. From the N
AVIGATION
P
AGE
, press MENU | ENT or from the M
AP
P
AGE
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .
2. Press
↓ to route name|
ENT |
↓ to
R OUTE W AYPOINTS L IST
. Use
↓ and ↑ to
select a waypoint, then press ENT .