Lowrance electronic M68C IceMachine - Manual (Page 123)

115
1. From the N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
,
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .
2. Press
↓ to select route name|
ENT |
→ to
R EVERSE
| ENT |
← to
N AVIGATE
R
OUTE
| ENT .
3. Upon arrival at your destination, cancel navigation:
press
MENU | MENU |
↓ to
C ANCEL N AVIGATION
| ENT | ←
to Y ES
| ENT .
Trails
Delete a Trail
This is the command used to erase or delete a trail:
Press
MENU | MENU |
↓ to
M
Y
T
RAILS
| ENT |
↓ to trail name|
ENT|
↓ to D
ELETE
T RAIL
| ENT |
← to
Y ES
| ENT .
Tip:
You can also delete all trails at once:
1. Press
MENU | MENU |
↓ to
M Y T RAILS
| ENT .
2. Press
→
to D ELETE A LL
| ENT |
← to
Y ES
| ENT .
Edit a Trail Name
To edit a trail name: press
MENU | MENU |
↓ to
M
Y
T
RAILS
| ENT |
↓ to trail
name| ENT|ENT . Press
↑ or ↓ to change the first character, then press →
to the next character and repeat until the name is correct. Press ENT
then EXIT | EXIT | EXIT | EXIT to return to the previous page display.
Tip:
You can quickly call up the Edit Trail menu by selecting a trail on
the map with the cursor. Simply move the cursor over a trail and a
pop-up box appears. Press
WPT and the Edit Trail menu opens.
At left, trail selected with map cursor. The box at the bottom of the
screen shows distance and bearing from current position to the se-
lected point on the trail. At right, the Edit Trail menu.