Lowrance electronic Lowrance GlobalMap 5500C User Manual
Page 123
117
Waypoint Information screens with the Go To Waypoint command se-
lected (left) and the Find on Map command selected (right).
To clear these menus and return to the previous page, press
EXIT
re-
peatedly.
5.
If you're looking
by name
, there are two options:
A.
You can
spell out
the name in the top selection box. Press
↑
or
↓
to change the first letter,
then press
→
to move the cursor to the next letter and repeat until the
name is correct, then press
ENT
|
ENT
.
B.
Or you can jump down to the
lower selection list by pressing
ENT
, then press
↓
or
↑
to select a way-
point from the list and press
ENT
. The waypoint information screen ap-
pears.
Find By Name menu (left). Waypoint Information screen (center). The
found waypoint (right) is highlighted by the cursor on the Map Page.
A. T
o navigate
to the waypoint, press
ENT
. (Go To Waypoint com-
mand is already highlighted.) The unit will show navigation infor-
mation to the waypoint.
B. T
o find
the waypoint, press
↓
to
F
IND ON
M
AP
|
ENT
. The Map Page
appears with the cursor centered on the found waypoint.
To clear these menus and return to the previous page, press
EXIT
re-
peatedly.