Lowrance electronic Lowrance GlobalMap 5500C User Manual
Page 54
48
Sequence for saving a trail and beginning a new one. My Trails com-
mand (left). The arrow to the right of Trail 17 (center) indicates the
trail is "active" and the check to the left shows the trail is visible on the
map. The Edit Trail menu (right) with Active command selected.
3. Press
↓
→ to
A
CTIVE
|
ENT
. This unchecks the Active option.
4. To return to the previous page, press
EXIT
|
EXIT
|
EXIT
|
EXIT
. As you
left the Edit Trail menu, you will notice that a new trail was started
with a new sequential number. In the example below, the new trail is
number 15, showing zero points. Note that Trail 14 is inactive, but it is
still visible on the map.
A new trail, Trail 15, is created when Trail 14 is set to inactive. Any
new travel will be recorded on this trail, which is active and visible.
Trails do not need to be visible in order to be active.
You can save and recall up to 10 different plot trails, which can also be
copied to your MMC for archiving or for transfer to your MapCreate
software.
Active
symbol
Visible
symbol