La Crosse Technology WS-8011UM - Manual (Page 7)

7
3) Press and release the “+” button to select the hour.
Note: when setting the hour, “PM” will appear to the left of the hour display, if
it is AM nothing will be displayed.
4) Press and release the “SET” button to confirm the hour setting, and to shift
to select the minutes.
5) Press and release the “+” button to select the minutes.
6) Press and release the “SET” button to confirm the time setting and to
advance to manually set the calendar.
F) CALENDAR SETTING
Note: When the WWVB signal is found, that date will over-ride the manually set
date.
1) Hold down the “SET” button for 2 seconds (the selected time zone will
flash).
2) Press and release the “SET” button 5 times until the default year “00”
flashes in the date LCD.
3) Press and release the “+” button to select the year.
4) Press and release the “SET” button to confirm the year, and to set the
month.
5) The default month “1” will flash.
6) Press and release the “+” button to select the appropriate month.
7) Press and release the “SET” button to confirm the month and to set the date.
8) The default date “1” will flash.
9) Press and release the “+” button to select the appropriate date.
10) Press and release the “SET” button to confirm the date and to set the
weekday.
11) The default weekday “MON” (depends on selected language) will flash.
12) Press and release the “+” button to select the appropriate weekday.
13) Press and release the “SET” button to confirm the calendar settings and to
advance to select either 12 or 24-hour time display.
G) 12/24-HOUR SETTING
Note: 12-hour uses AM/PM, 24-hour is also known as “military” time.
1) Hold down the “SET” button for 2 seconds (the selected time zone will
flash).
2) Press and release the “SET” button 9 times until the “12” hour time display
flashes in the time LCD.
3) Press and release the “+” button to toggle between 12 and 24 hour time.
4) Press and release the “SET” button to confirm the 12/24-hour time display
and to advance to select either
°F or °C.