La Crosse Technology WS-8011UM - Manual (Page 8)

8
H) SELECTING
°F OR °C
1) Hold down the “SET” button for 2 seconds (the selected time zone will
flash).
2) Press and release the “SET” button 10 times until the default “
°F” flashes in
the time LCD.
3) Press and release the “+” button to toggle between
°F and °C.
4) Press and release the “SET” button to confirm the
°F or °C selection and
exit the program mode.
III)
FEATURES & OPERATIONS
A) CHANGING DISPLAY MODE (DAY, SECONDS, AND
TEMPERATURE)
There are three possible display modes to view the day, seconds, and
temperature. The month&date/weekday /indoor temperature/remote temperature
is the default.
To change the display:
1) Press and release the “+” button.
2) The display should now show the month&date/weekday/seconds/remote
temperature
3) Press and release the “+” button.
4) The display will now show the month&date/seconds/indoor
temperature/remote temperature.
5) Press and release the “+” button.
6) The display will return to the normal display.
B) THE ALARM
1) SETTING THE ALARM
Note: The duration of the alarm is 85 seconds. After each of the first two 25
second periods, the rate of the alarm increases.
(a) Hold down the “ALARM” button for 5 seconds.
(b) The “TIME” icon to the right of the minutes (in the time LCD) shifts to
“ALARM” and the hour digit of the alarm flashes.
(c) Press and release the “+” button to set the alarm hour.
(d) Press and release the “ALARM” button to confirm the hour and to set
the alarm minutes.
(e) The alarm minutes flash.
(f) Press and release the “+” button to set the alarm minutes.