Lexmark 5200 - Manual

Unpack your All-In-One.
Note: Contents may vary based on geography.
1
Note: You may need to purchase a
USB cable separately.
www.lexmark.com
5200 Series All-In-One
Connect the power cord.
2
Lift the paper support and extend
the paper exit tray.
5
Load paper and adjust the paper guide.
6
21D0070
Make sure the Power light is on.
3
Lift the scanner unit.
7
Remove the sticker and tape from the print cartridges.
8
Open the cartridge lids, insert the cartridges, and
snap the lids closed.
9
Close the scanner unit.
10
Safety information
• Use only the power supply provided with this product or the manufacturer's authorized
replacement power supply.
• Connect the power supply cord to an electrical outlet that is near the product and easily
accessible.
• Refer service or repairs, other than those described in the user documentation, to a professional
service person.
CAUTION: Do not set up this product or make any electrical or cabling connections, such as the
power supply cord or telephone, during a lightning storm.
Your All-In-One may include a
photo cartridge instead of a
black print cartridge.
Before you continue, remove the
photo cartridge from the print
cartridge storage unit.
Reminder: Save the print
cartridge storage unit to protect
unused cartridges.
Press to scroll to your language
and then press .
4
Steps 11 - 15