Life Fitness Cable Motion G7-002 - Manual (Page 19)

19
22
44 43
43 44
1
STEP 10:
Use the following hardware contained in Blister Pack (7-4):
M10 x 20mm SCREW (Qty. 8)
M10 WASHER (Qty. 8)
Install one FOOT EXTENSION (22) to the bottom of the LEFT TOWER (1) using four M10 x 20mm SCREWS (43)
and four M10 WASHERS (44).
Repeat the above step to attach the other FOOT EXTENSION (22) to the bottom of the RIGHT TOWER (11).