Printing iron-on transfers – Lexmark Z45 User Manual
Page 55
55
Printing iron-on transfers
You can load up to 25 iron-on transfers, depending on the thickness of the iron-on transfers.
You may want to print your image on plain paper before printing it on an iron-on transfer. This
ensures you do not waste iron-on transfers perfecting the image you would like to print. When
the image prints to your satisfaction, load the iron-on transfers.
Step 1: Load the iron-on transfers
•
If your transfers came with instructions, read
them carefully.
•
Make sure your transfers are not used or
damaged.
•
Make sure the print (blank) side is facing you.
•
Load the iron-on transfers vertically against
the right side of the paper support.
Note: Do not push the iron-on transfers too far into the printer.
•
Squeeze and slide the paper guide to the left edge of the iron-on transfers.