La Crosse Technology Radio Controlled Projection Alarm WT-5600 - Manual (Page 7)

7
3. From –5h to –8h, a US map with the highlighted time zone will also be
displayed to the right of the time display.
4. Press the “AL” button to move to the hour setting or press the “SNOOZE”
button to confirm the time zone and return to the display mode.
D. TIME SETTING
Note: When the WWVB signal is found, that time will over-ride the manually set
time.
1. Hold down the “MODE/+” button for 2 seconds (the selected time zone
will flash), press the “AL” button once until the hour flashes in the time
LCD.
2. Press the “MODE/+” button to select the hour.
3. Press the “AL” button to move to the minute setting.
a. Note: When setting the hour, “PM” will appear to the left of the hour
display, if it is “AM” nothing will appear.
4. Press the “MODE/+” button to select the minutes.
5. Press the “AL” button to confirm the time setting and advance to manually
set the date or press the “SNOOZE” button to confirm the time and return
to the display mode.
-4h Atlantic Time
-5h Eastern Time (default setting)
-6h Central Time
-7h Mountain Time
-8h Pacific Time
-9h Alaskan Time
-10h Hawaiian Time
-11h, -12h Next two time zones West of HAW
0h Greenwich Mean Time
-1h, -2h, -3h Three time zones West of GMT