Lowrance electronic LCX-17M User Manual
Page 144
136
Navigating along a route: Fig. 1 shows the Navigation Page at the start
of a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, the
traveler has arrived at Wpt 3; the arrival alarm has been triggered and
the bearing arrow on the compass rose is turning to point toward Wpt
4, off to the east. In Fig. 3 the traveler has turned east on his new
course and is heading straight for Wpt 4, which is 2.36 miles away. Fig.
4 shows route navigation on the Map Page. In this figure, the traveler
has reached Wpt 4 and is half-way along the leg between Wpts 4 and 5.
Navigate a Route in Reverse
Here's how you run a route backward, from the end waypoint to the
beginning waypoint:
1. From the
N
AVIGATION
P
AGE
, press
MENU
|
ENT
or from the
M
AP
P
AGE
,
press
MENU
|
MENU
|
↓ to
R
OUTE
P
LANNING
|
ENT
.
2. Press
↓
to select route name|
ENT
|
↓
to
N
AVIGATE
|
→
to
R
EVERSE
|
ENT
|
←
to
N
AVIGATE
|
ENT
.
3. Upon arrival at your destination, cancel navigation:
press
MENU
|
MENU
|
↓ to
C
ANCEL
N
AVIGATION
|
ENT
|
← to
Y
ES
|
ENT
.
Figure 2.
Figure 1.
Figure 3.
Figure 4.